Mike,
All the previous suggestions will work but what
they didn't mention was that you will probably have to
take some of the brake fluid out of the master
cylinder before you push the pistons back into their
bores. When you push the pistons in you are also
pushing the fluid back up into the master cylinder
reservior. Get a turkey baster, you know that funny
looking tube with a large bulb on one end, and remove
some of the fluid being careful not to drop any on the
paint. Now use your favorite method for pushing in
the pistons, add the new pads, and top off the
reservior and your done..
Bob
Yahoo! Greetings - Send FREE e-cards for every occasion!
///
/// mgs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
///
|