[Top] [All Lists]

Re: timing

To: "Tim Baxter" <>, <>
Subject: Re: timing
From: "Telewest \(PH\)" <>
Date: Thu, 10 Oct 2002 13:50:45 +0100
It varies with year, spec and dizzie serial number, but a static of 7 or 8
BTDC should get you started.  Again the proper figures would be useful for
strobe timing, you can get these from the website below by clicking on
'Spanners' and 'Dizzie Curves'.


----- Original Message -----
From: "Tim Baxter" <>
To: <>
Sent: Thursday, October 10, 2002 12:37 PM
Subject: timing

> With the motor not running, can anyone give me a ballpark figure of
> where the timing should be? Gotta start somewhere, right?

///  or try
///  Archives at

<Prev in Thread] Current Thread [Next in Thread>