[Top] [All Lists]

Re: front license plate

To: Paul Hunt <>
Subject: Re: front license plate
From: dave houser <>
Date: Fri, 30 Jun 2006 17:25:27 -0400
Paul and others,
The reference Paul makes on pg. 11 has the plate mounted through the top 
holes of the plate. My car had Moss brackets attached on the bottom 
plate holes and looked like Pg. 25 that Paul additionally references. It 
was definitely in the air flow but is no longer. I'll see what happens 
in the Florida air tomorrow.
Dave Houser

Paul Hunt wrote:

>Even so UK plates have the top edge level with the middle of the bumper or
>fractionally lower.  Clausager shows an American plate on page 11 where the
>top edge *is* higher but still only as high as the top of the bumper I'd
>say, and still clear of the radiator intake.  Angling the bottom of this
>forwards would direct more air into the intake, I'd have thought.  Clausager
>also shows a 'Sabrina' car on page 25 where the plate *is* in the airflow,
>but the Parts Catalogue shows deeper brackets for North American cars than
>UK so I'd say this car has the wrong (or no) brackets.
>----- Original Message ----- 
>>  Most USA licence plates are 12 inches wide, six inches high.

<Prev in Thread] Current Thread [Next in Thread>