[Top] [All Lists]

Re: [oletrucks] '57 235 PCV

To: haist@jps.net, oletrucks@autox.team.net
Subject: Re: [oletrucks] '57 235 PCV
From: Passnb4U@aol.com
Date: Thu, 11 Nov 1999 22:07:12 EST
In a message dated 11/11/99 5:18:45 PM Pacific Standard Time, haist@jps.net 

> I'm hooking up the jewelry on the '57 235 (car) engine I installed in a '46
>  half ton.
>  My question is about the Positive Crankcase Ventilation system.  There is a
>  hose connection on the
>  left side (about mid way) of the valve cover and a lager one on the top 
>  the rear.
>  I presume the hose from the side connects to the in-line PCV valve and then
>  to the manifold below
>  the carb and the other one is an intake line breathing through the air
>  cleaner.  Am I correct in my assumptions??  If not, please clue me in!!
>  Thanks in advance.
>  Whitney Haist
>  Orinda, CA

  May be something different on a '57 car than my '59 PU 235, but all I have 
is a down draft tube on the passenger side of the block, no hoses at all 
to/from the valve cover.


oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>