[Top] [All Lists]

Fw: [oletrucks] oil line placement

To: "OLD TRUCKS" <oletrucks@autox.team.net>
Subject: Fw: [oletrucks] oil line placement
From: "Martin Rosenbaum" <Martin@in4web.com>
Date: Fri, 26 Nov 1999 05:29:23 -0500
I am re-sending this as I have only received one reply and I do not think it
was accurate.  PLEASE-PLEASE would someone help.   Thanks     Marty
----- Original Message -----
From: Martin Rosenbaum <Martin@in4web.com>
To: OLD TRUCKS <oletrucks@autox.team.net>
Sent: Monday, November 22, 1999 8:02 PM
Subject: [oletrucks] HELP-HELP-HELP

> Hi All,
>      I am in desperate need of some help.  I am reatoring a 1946 Chevy 1/2
> ton Pick Up with an origanal 216 engine.  The engine has been re-done and
> the last thing I have to do before I start it is to hook up the oil filter
> and lines.  I lost the pictures that I took before I took everything apart
> and am afraid to  hook the oil line up from memory.  I sent a picture of
> engine to Wayne Osborne and he kindly gave it a web site address, which
> will find below.  Could and would someone ouit there look at the picture
> tell me which  number hooks up to which number.  #1 is from the oil pump.
> #8,9&10 are the "T connection that I know I took off. #4 is where the tube
> that goes across the block, on the inside, comes out. # 6 is the bottom
> connection on the oil filter and # 5 is the side connection.  the oil
> is #7.  If anyone needs any more help trying to figure out what I am
> please E-mail me off line.   PLEASE HELP.  I AM DESPERATE..  THE URL FOR
> PICTURE IS:   http://www.chevytrucks.org/users/wayne/Marty1.jpg
> Once again many-many thanks to Wayne Osaborne for all his help
> Marty
> martin@in4web.com
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>
  • Fw: [oletrucks] oil line placement, Martin Rosenbaum <=