I rebuilt my rearend in my 1950 3100, I replaced the vent with a new one I
purchased at Heavy Chevy truck parts in Siloam Springs, AR. It was easier
then trying to locate one that would properly fit. It saved me a lot of
time and frustration trying to find the correct one to replace the ole one,
and it is a metal unit, not a plastic one that I had found on a lot of
vehicles. Unfortunately here in Chicago there are not a lot of junkyards
with older vehicles in them to try to salvage parts.
Jon 50 3100
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
-----Original Message-----
From: owner-oletrucks@autox.team.net
[mailto:owner-oletrucks@autox.team.net]On Behalf Of Advdesign1@aol.com
Sent: Saturday, January 08, 2000 5:26 AM
To: oletrucks@autox.team.net
Subject: Re: [oletrucks] rear end parts
>
> For the vent , you should find one at a salvage yard that will work,
they
> just press in,
Newer ones press in, but older ones have pipe threads. Bring 7/16 open
wrench to remove a salvage unit.
Bob ADler
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|