Re: [oletrucks] Break cylinder question

oletrucks

Re: [oletrucks] Break cylinder question

To:	dkrehbiel@kscable.com, oletrucks@autox.team.net
Subject:	Re: [oletrucks] Break cylinder question
From:	Advdesign1@aol.com
Date:	Sat, 19 Feb 2000 18:55:41 EST

> Anyone had any experience with DOT 5?
>  
I'm recommending DOT 5 only if you do not have a vacuum booster.  With power 
brakes I would stick to DOT 3 to prevent the posibility of sucking fluid into 
the engine where it burns into fine sand, which scours an engine unacceptably.
Bob ADler
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
Re: [oletrucks] Break cylinder question, (continued) Re: [oletrucks] Break cylinder question, Grant Galbraith Re: [oletrucks] Break cylinder question, Bruce Damen Re: [oletrucks] Break cylinder question, Terry S. Glines Re: [oletrucks] Break cylinder question, G. Simmons Re: [oletrucks] Break cylinder question, Grant Galbraith Re: [oletrucks] Break cylinder question, Deve Krehbiel Re: [oletrucks] Break cylinder question, ADvent Re: [oletrucks] Break cylinder question, ADvent Re: [oletrucks] Break cylinder question, ADvent Re: [oletrucks] Break cylinder question, ADvent Re: [oletrucks] Break cylinder question, Advdesign1 <=

Previous by Date:	Re: [oletrucks] 305 vs 350, TORODRVR
Next by Date:	[oletrucks] AD speedometer rpr, Bob Fischer
Previous by Thread:	Re: [oletrucks] Break cylinder question, ADvent
Next by Thread:	Re: [oletrucks] 51 panel 3/4 ton, john r dorsey
Indexes:	[Date] [Thread] [Top] [All Lists]