Thanks!!!!
On Fri, 11 Aug 2000 MKlepp4335@cs.com wrote:
> In a message dated 8/11/00 6:00:10 PM Central Daylight Time, bigfred@unm.edu
> writes:
>
> << I measured 54" from back of backing plate to back of backing plate, does
> this sound right? I think 53 - 55 inches should be ok, any opinions? >>
>
> The stock distance from drum face to drum face is 62", that is what you need
> to measure. Brakes can be of many different sizes (depth), so look for the
> face to face measurement. (I put in a 3.90 '62 truck rear to keep the six
> lug wheels)
>
> Mike Klepp
> '48 3100
> Wichita Falls, TX
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|