That is a very good point Bob. Then I wouldn't have to always remember
which side my filler is on!
----- Original Message -----
From: "Bob KNOTTS" <raknotts@qwest.net>
To: "oletrucks" <oletrucks@autox.team.net>; <Ie61pah@aol.com>; "Rick
Carlisle" <rcarlisle@comcast.net>
Cc: "Oletrucks Mail List" <oletrucks@autox.team.net>
Sent: Tuesday, April 30, 2002 7:58 PM
Subject: Re: [oletrucks] gas filler
> I think I had a 55 Mercury which had this type of filler. You could prop
the
> license plate open with the gas cap. Another advantage of the center cap
is
> you can fill the tank from either side. Bob K in PHX, AZ
>
>
> ----- Original Message -----
> From: "Rick Carlisle" <rcarlisle@comcast.net>
> To: <Ie61pah@aol.com>
> Cc: "Oletrucks Mail List" <oletrucks@autox.team.net>
> Sent: Tuesday, April 30, 2002 6:20 PM
> Subject: Re: [oletrucks] gas filler
>
>
> > I like this one Pat. Was there ever one that stayed down when you
wanted
> to fill up? I would hate having to hold the tag down while I filled up,
if
> you follow.
> >
> > Thanks.
> >
> > Rick
> > ----- Original Message -----
> > From: Ie61pah@aol.com
> > To: rcarlisle@comcast.net ; oletrucks@autox.team.net
> > Sent: Tuesday, April 30, 2002 6:55 PM
> > Subject: Re: [oletrucks] gas filler
> >
> >
> > Depending on what you have for a rear bumper or roll pan, you can
get
> a hinged license plate frame from one of the old cars that had them, and
put
> your filler neck right in the center, ( behind the license plate.) Outa
> sight----outa mind....no one knows its there!!! Just an idea.
> > Pat Hollister
58
> step
> > oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|