You can buy a plastic one for about $2.50. I sawed the input shaft off an
old trans and have been using that for years now.
Allen in Seattle
'50 3100
----- Original Message -----
From: "Bob KNOTTS" <raknotts@qwest.net>
To: "A BUTLER" <andrewcbutler@msn.com>; <oletrucks@autox.team.net>
Sent: Tuesday, March 04, 2003 12:14 AM
Subject: Re: [oletrucks] Clutch '51 1/2 ton
> You can buy one pretty cheap, made out of wood. (At least, you could 20
> years ago, when I did my last clutch). Bob K in PHX, AZ.
>
> ---- Original Message -----
> From: "A BUTLER" <andrewcbutler@msn.com>
> To: <oletrucks@autox.team.net>
> Sent: Monday, March 03, 2003 10:14 PM
> Subject: [oletrucks] Clutch '51 1/2 ton
>
>
> > I understand it is best to get (or rent) an alignment tool when
replacing
> the
> > clutch. It there an alternative method ?
> >
> > 51 chev 1/2 ton 5 window
> > oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|