[Top] [All Lists]

Re: [oletrucks] Rear Ends

To: g.perez@charter.net
Subject: Re: [oletrucks] Rear Ends
From: Spinningroach@aol.com
Date: Sat, 22 Mar 2003 04:19:24 EST
Hi George, I have no experience in this at all, but this is what I read in 
"How to build tri-five chevy trucks" on page 15 : 

Four-link rear suspension : For this application, Bruce already had a Lincoln 
Versailles rear that measures out to 58 inches in width. For the '55-'57 
Chevy trucks, the rear end width should be anywhere between 57-60 inches, 
similar to an early '67-'69 Camaro. The Versailles rear came with factory 
disc brakes and was perfect to fit in the '57 frame etc. (then everything is 
detailed with pictures)

I know this is not exactly what you were asking for, but I hope it gives you 
an extra information on the subject.

Good luck! JP
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>