I installed a kit to convert my regular internally wired to one wire and
they did mention that there are cases that required it to be energized
polarized what ever, by taking a hot 12volt lead and touching the two
small terminals that are not normally used. And wal la it should work,
mine worked the first time, Idon't think I would go that route next
time. the reg internal one can be just jumpered I believe from the main
charge lead to the number two terminal and works fine. I have been
running that combination on my not chevy econoline for a couple of years
and you don't need to rev the motor to get it to first charge at startup.
ed Let me now if I am in error. Thanks Ed 53 Ad 3100 So.Calif.
On Fri, 18 Apr 2003 07:10:45 -0700 Joe Garcia <joegarcia1@comcast.net>
writes:
> It's true..........
>
> When the brand new One Wire is installed and doesn't charge after
> reaching
> the higher rpm's hopefully you will remember this email and
> appreciate this
> advise. Sometimes they work with exciting the field by polarizing
> it and
> other times you have to polarize it to get it to work for the first
> time.
>
> Joe
> ----- Original Message -----
> From: "Hanlon, Bill (ISS Houston)" <Bill.Hanlon@hp.com>
> To: "Joe Garcia" <joegarcia1@comcast.net>; "Devin Timmons"
> <64bowtie@quik.com>; "oletrucks list" <oletrucks@autox.team.net>
> Sent: Friday, April 18, 2003 6:10 AM
> Subject: RE: [oletrucks] gen to alt wiring
>
>
> Don't think so. You polarize generators, not alternators.
>
> -----Original Message-----
> From: Joe Garcia [mailto:joegarcia1@comcast.net]
> Sent: Thursday, April 17, 2003 11:13 PM
> To: Devin Timmons; oletrucks list
> Subject: Re: [oletrucks] gen to alt wiring
>
>
> I'm pretty sure it will tell you in the instructions that come with
> the one
> wire alternator but just in case............remember that you have
> to
> polarize it the first time for it to start charging.
>
> Joe
> ----- Original Message -----
> From: "Devin Timmons" <64bowtie@quik.com>
> To: "oletrucks list" <oletrucks@autox.team.net>
> Sent: Thursday, April 17, 2003 8:30 PM
> Subject: [oletrucks] gen to alt wiring
>
>
> > Thanks to all for the assistance. I think at this point I will
> switch
> over to
> > the 1 wore style, just to make it easier. I didn't realize how
> easy it
> was to
> > do, but I haven't actually done it yet, so I may come back over
> the
> weekend
> > with some tales to tell.
> >
> > Devin
> >
> > '57 3100
> > oletrucks is devoted to Chevy and GM trucks built between 1941 and
> 1959
> oletrucks is devoted to Chevy and GM trucks built between 1941 and
> 1959
> oletrucks is devoted to Chevy and GM trucks built between 1941 and
> 1959
>
>
+++++++++++++++++++++++++++++++++++++++++++++++++
Ed ke6bnl@juno.com ( 1950 f1 & 1963econo pu
Agua Dulce Ca. 91390 70 chevy S/B) 1948 Ford
F3
So. Calif. 70 mil N.Eof Los Angeles 1953 Chevy pu 3100)
+++++++++++++++++++++++++++++++++++++++++++++++++
________________________________________________________________
The best thing to hit the internet in years - Juno SpeedBand!
Surf the web up to FIVE TIMES FASTER!
Only $14.95/ month - visit www.juno.com to sign up today!
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|