I would grind down the rusty areas and then treat the metal with some "RUST
MORT" available at the Automotive paint stores. When the rust is converted
I would wipe the area down with some thinner to remove any residual rust
solution. Then I would apply some Eastwood Rust Encapsulator.
> [Original Message]
> From: Tom C. <firstname.lastname@example.org>
> To: Oletrucks <email@example.com>
> Date: 10/18/2003 6:27:59 PM
> Subject: [oletrucks] rusty
> I need some advice on how to slow down the rust or even stop it until I
> get to the body work. Here is a website with a few pictures of what I am
> dealing with. http://coopscorner.com/55truck/rust.htm At the rate I am
> it will be awhile before I can get to the body, but I would love to slow
> down the rusting,,,any suggestions on what to do, without having to take
> all apart before I am ready to take it apart, if ya know what I mean.
> Thanks for any and all help..........
> Tom in SC
> 55 2nd
> ` 97 S-10
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959