oletrucks
[Top] [All Lists]

Re: [oletrucks] carburetor and straight axle

To: wayne@chevytrucks.org, lcorley@ticnet.com, oletrucks@autox.team.net
Subject: Re: [oletrucks] carburetor and straight axle
From: "John Herrera" <jrherrera90@hotmail.com>
Date: Sun, 10 Jul 2005 15:19:23 -0400
>Sounds like you've replaced all the components, i've done the same to mine 
>and still had a bit of wandering with mine as well. You didn't mention if 
>you were running radial tire--that helps a bit with the vehicle wanting to 
>wander the road while driving and also the front end alignment.The tire 
>shop guys have fun when ya pull one of these into the bay as they generally 
>only know 4 wheel alignments and can't call up a 56 on their computer. I 
>had the guys align mine to about a 1/4 inch of toe in and that seemed to 
>stop the truck from darting when hitting a small bump in the road. At the 
>same time I went from 8 inch to 7 inch rims going down in tire size, I also 
>installed disc brake with the roller bearings so I was able to minimize the 
>play a bit but still have some there...   Doing all that at the same time 
>sure do put a bit of stability in the steering but I still have an inch or 
>so of play in the wheel motion.   Just telling ya what I've done to attempt 
>to remedy...  --wayne

Wandering can be caused by problems with the REAR axle. If your steering and 
front axle check out O.K., you might consider checking for a bent rear.

John H.

oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959





<Prev in Thread] Current Thread [Next in Thread>