----- Original Message -----
From: "John Miller" <jem@milleredp.com>
>> The Black pipe was actually pretty easy to work with given the correct
>> tools.
>
> I'd rather solder copper...
A +1 on the "rather solder copper" than work with threaded pipe. Had started
with threaded connections and discovered it was difficult for me to get a
non-leaking connection at 175 psi. I was finally able to get it to go with
Teflon paste - threw the Teflon tape back in the toolbox to use for water
connections. Anyway, switched to 1", 3/4" and 1/2" "L" copper and it went
much more smoothly after that.
Arvid
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|