spitfires
[Top] [All Lists]

Column lighting switch question, Spitfire 4-early Mk.3 "NADA" cars only

To: Scions of the Spitfire <spitfires@Autox.Team.Net>
Subject: Column lighting switch question, Spitfire 4-early Mk.3 "NADA" cars only
From: Andrew Mace <amace@unix2.nysed.gov>
Date: Wed, 23 Dec 1998 16:26:56 -0500 ()
Hi (everyone who owns a LHS Spitfire 4, Mk.2 or early Mk.3 built for the
North American market. The rest of you are welcome to delete this message
NOW). I've a quick question or two as to how the lighting switches are set
up on your cars.

Does the column switch act as a master lighting switch, with a separate
dimmer switch on the floor, or is the column switch side-main-dip, with
master light switch on the dash? Also, does it have a "pull to flash" 
built into the column switch? [OK, THREE questions.] Is the stalk chrome
or black (either painted or covered in a black plastic/rubber)?  [OK, make
that FOUR questions!] If possible, could you see if you could find a Lucas
part number on the switch? It might be visible by removing the "cowl" and
should be a five-digit number such as 34527 or 34528 or 34629. 

Thanks in advance!

--Andy

* * * * * * * * * * * * * * * * * * * * * * *
* Andrew Mace, President and                *
*   10/Herald/Vitesse (Sports 6) Consultant *
* Vintage Triumph Register <www.vtr.org>    *
* amace@unix2.nysed.gov                     *
* * * * * * * * * * * * * * * * * * * * * * *





<Prev in Thread] Current Thread [Next in Thread>
  • Column lighting switch question, Spitfire 4-early Mk.3 "NADA" cars only, Andrew Mace <=