What do you do if the engine is out?
One of these days I plan to start rebuilding my spare 1296 and it is
sitting happily in the corner of my garage......
---------------------------------------------------------------
Date: Sun, 17 Dec 2006 22:47:14 -0800 (PST)
From: Doug Braun <doug@dougbraun.com>
Subject: Re: Crank Shaft Pulley Removal
If you but a big monkey wrench on the nut, rest the
handle end on the left-side frame, and hit the
starter,
the nut will unscrew....
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|