spridgets
[Top] [All Lists]

Re: Exhaust - After the Inspection

To: spridgets@Autox.Team.Net
Subject: Re: Exhaust - After the Inspection
From: drded@ix.netcom.com (David Deutsch)
Date: Tue, 28 Apr 1998 19:38:39 -0500 (CDT)
Reply-to: drded@ix.netcom.com (David Deutsch)
Sender: owner-spridgets@Autox.Team.Net
You wrote: 
>.  It has the three pipes coming down
>into the one down pipe and the three sort of twist into the one.  
Doesn't
>look like the pictures of the flanged type I've seen which don't seem 
to
>twist together like that.  About an inch and a half down from where 
they
>all meet there seems to be a weld which connected the manifold to the 
old
>front pipe.  About an inch down form this weld is where the little guy
>snapped in two on me on NJ Route 3.  :)
 
This sounds like a description of a tubular header not a cast iron 
manifold. Let me know how you make out. You may also want to check the 
mgcars USA parts webpage at http://www.mgcars.org.uk/class/USAPFS.html
Good Luck and I am looking forward to welcoming you to NAMGBR as a new 
member.
Safety Fast,
David Deutsch
Membership Coordinator 
North American MGB Register   

<Prev in Thread] Current Thread [Next in Thread>