[Top] [All Lists]

Re: Water Temp Gauge Broke

To: Ajhsys@aol.com, spridgets@autox.team.net, gottstein@erols.com
Subject: Re: Water Temp Gauge Broke
From: Lancer7676@aol.com
Date: Wed, 4 Aug 1999 19:03:38 EDT
Reply-to: Lancer7676@aol.com
Sender: owner-spridgets@autox.team.net
In a message dated 08/04/1999 1:08:16 PM Eastern Daylight Time, 
Ajhsys@aol.com writes:

<< The only problem with a used gauge is that you can't tell by looking at it 
 whether the capillary tube has been evacuated. >>

Cant you stick the working end (the radiator end) in a pot of boiling water 
and see if the temp guage rises to 212 degrees to tell whether the cap tube 
has been evaced?
 <<Can the dual gauge with the mechanical water temp be replaced by another 
 gauge with a different sensor? >>

Good question--I will be interested in the responses.


<Prev in Thread] Current Thread [Next in Thread>