spridgets
[Top] [All Lists]

Re: Interesting item on eBay web site item#222513917: austin

To: macleans@earthlink.net, type79@ix.netcom.com
Subject: Re: Interesting item on eBay web site item#222513917: austin
From: Bryan Vandiver <Bryan.Vandiver@Eng.Sun.COM>
Date: Tue, 21 Dec 1999 12:39:24 -0800 (PST)
Cc: Bryan.Vandiver@Eng.Sun.COM, spridgets@autox.team.net
Reply-to: Bryan Vandiver <Bryan.Vandiver@Eng.Sun.COM>
Sender: owner-spridgets@autox.team.net
I remember going over this in a history class in college. The reason why the 
dimensions in India are different, are because when they decided to adopt the 
English system of measurement, they took length of a foot literally. So the 
local king at the time decided to use the length of his own foot as the 
standard. His foot was actually less than twelve inches, and so when it was 
divided by 12 to the 'inch' there was also smaller. India then put several laws 
in place stating that all products imported to the country had to be measured 
by 
the 'Indian standard', so rather than rewrite all the service manuals for their 
cars, England 'retooled' all products destined for India to the 'Indian 
standard'.

Gee I think my eyes are turning brown... ;-)

Regards,
Bryan

BTW - I have a bridge near San Francisco I need to sell - anyone interested???
 
>X-Accept-Language: en
>MIME-Version: 1.0
>To: Mike Maclean <macleans@earthlink.net>
>CC: Bryan Vandiver <Bryan.Vandiver@eng.sun.com>, spridgets@autox.team.net
>Subject: Re: Interesting item on eBay web site item#222513917: austin
>Content-Transfer-Encoding: 7bit
>
>Mike,
>It is widely known on the internet that the cars destined for India were 
dimensionally
>different from their British cousins, hence the problem with rear deck emblems 
and
>wire wheels.
>
>
>Jay Fishbein
>
>
>Mike Maclean wrote:
>
>> Bryan,
>>      I can't say.  The repro was made in India.  Possibly they did not have a
>> Bugeye to make sure it fit correctly.  I used to work in manufacturing 
engineering
>> and believe me, these dimension errors happen frequently.  Factor in that the
>> manufacturer is thousands of miles form the end client and further from the 
users.
>> All I know is the original drops right in and the repro does not as the pins 
are
>> too close together.  Maybe if I bought another repro it would fit, but I'm 
much
>> happier with an original back there anyway.
>> Mike MacLean-60 Sprite
>>
>> Bryan Vandiver wrote:
>>
>> > Mike,
>> >
>> > I have both a chrome, and a gold Sprite arrow from Moss for my bugeye, and 
they
>> > both fit fine. I wonder what happened with yours.
>> >
>> > Regards - Bryan
>> >
>> > >X-Accept-Language: en
>> > >MIME-Version: 1.0
>> > >To: type79@ix.netcom.com
>> > >CC: "spridgets@autox.team.net" <spridgets@autox.team.net>
>> > >Subject: Re: Interesting item on eBay web site item#222513917: austin
>> > >
>> > >I remember buying a reproduction rear emblem (arrow) for my Bugeye from
>> > >Moss.  I went so far as to go to the Moss store in Goleta from San
>> > >Bernardino for the express purpose to pick out the best rear emblem out
>> > >of the bunch.  I also needed a new exhaust pipe and did not want it cut
>> > >in half to ship.  When I returned home, the new repro would not fit the
>> > >car.  The spacing on the mounting pins was shorter than original.  I
>> > >would have to enlarge the holes in the rear deck lid of the car if I
>> > >wanted to use it.  Luckily, a few months later I found an original
>> > >Sprite Arrow at an annual Mini swap meet here in Southern California.
>> > >It fit perfectly, I only had to repaint it myself.
>> > >     Anyone need a repro arrow that doesn't quite fit?
>> > >Mike MacLean-60 Sprite
>> > >
>> > >type79@ix.netcom.com wrote:
>> > >
>> > >> Listers,
>> > >>
>> > >> How silly.
>> > >>
>> > >> The bidding has now reached $76.00!
>> > >>
>> > >> That's $76.00 for a box!
>> > >>
>> > >> If there has been one item that has continually been an acceptable
>> > >> reproduction it is the
>> > >> emblems, front AND rear for both the Bugeye and later Spridgets.
>> > >>
>> > >> I thought this one was out of the ballpark when bidding reached
>> > >> $25.00.
>> > >>
>> > >> The repros are so accurate that for all anyone knows, this could be a
>> > >> repro in an original box.
>> > >>
>> > >> Jay Fishbein
>> > >>
>> > >> dthompson@gbc.ca wrote:
>> > >>
>> > >>   The latest item to go wild on eBay. I was knocked out of the bidding
>> > >> a
>> > >> long time ago.
>> > >>
>> > >>   Daniel58612
>> > >>
>> > >>   Title of item:  austin healey bugeye sprite bonnet emblem NOS
>> > >>   Seller: crane@gloryroad.net
>> > >>   Starts: 12/19/99, 10:40:53 PST
>> > >>   Ends:   12/24/99, 10:40:53 PST
>> > >>   Price:  Currently $62.01
>> > >>   To bid on the item, go to:
>> > >>
>> > >>
>> > >>   Item Description:
>> > >>           This is a NOS bonnet emblem for a bugeye sprite. As you can
>> > >> see it is not a cheesy
>> > >>   reproduction and comes with its origional box.Money order prefered.
>> > >> Checks must clear
>> > >>   before shipping. Happy bidding.
>> > >>   On 12/19/99 at 10:47:39 PST, seller added the following information:
>> > >>
>> > >>   On 12/19/99 at 10:50:19 PST, seller added the following information:
>> > >>
>> > >>   On 12/19/99 at 10:57:36 PST, seller added the following information:
>> > >>
>> > >>   On 12/19/99 at 10:59:46 PST, seller added the following information:
>> > >>
>> > >>   On 12/19/99 at 11:03:50 PST, seller added the following information:
>> > >>
>> > >>           Visit eBay, the world's largest Personal Trading Community
>> > >> at
>> > >> http://www.ebay.com
>> > >
>


<Prev in Thread] Current Thread [Next in Thread>