spridgets
[Top] [All Lists]

Re: Spring slave bolts

To: "R. Glenn Cummins" <robert.g.cummins@ua.edu>, "Spridgets" <spridgets@autox.team.net>
Subject: Re: Spring slave bolts
Date: Wed, 27 Nov 2002 10:25:20 -0500
References: <003101c29626$eb4c8760$1907a082@tokyowhore>
anything over 3"-4" should work just fine for lowering the
spring pan, as long as the suspension is already at full extension.
The pan will only need to come down about 2" to relieve
all the spring pressure.

Paul Tegler
ptegler@cablespeed.com
www.teglerizer.com
----- Original Message -----
From "R. Glenn Cummins" <robert.g.cummins at ua.edu>
To: "Spridgets" <spridgets@autox.team.net>
Sent: Wednesday, November 27, 2002 10:08 AM
Subject: Spring slave bolts


> Hi everyone,
>
> I'm planning on getting started on a front-end rebuild over the
Thanksgiving
> holiday weekend.  Keep your fingers crossed.
>
> What size bolts do I need if I'm going to use the slave bolt method to
remove
> the front springs?  I'm much more comfortable with that than with using a
> jack.
>
> Thanks.  I'm sure I'll be contacting the list soon for more help.
>
> Glenn C.
> '74 Midget
> Tuscaloosa, Ala.

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/spridgets


<Prev in Thread] Current Thread [Next in Thread>