I got it together! Woohoo!
All told, it took me about an hour and a half from starting at putting
the gasket around the glass to tightening the last screw. Now I need to
install the exterior seals- the one to the scuttle and the two for the
vent windows. Then comes the fun of installing it on the car, but not
befoe I take the dent out of the top of the scuttle.
One step closer!
From: K. Valentine
Sent: 2/21/2006 11:43:49 PM
Subject: Re: reassembling windscreen
On Feb 21, 2006, at 4:32 PM, Chris King wrote:
> Hey guys,
> Attempting to reassemble my windscreen with new glass and gaskets. The
> gasket that goes around the screen seems a bit oversize. Should I pe
> putting the gasket around the screen and assembling the frame
> around it?
> I don't see how it can be done in any other order...
The three or four I have assembled were done by doing just what you
described in your question. Place the gasket on the glass and
assemble the frame around it. Using some dish-washing liquid to help
slip everything together and a second pair of hands to get everything
in alignment before you put the last of the aluminum frame in place
and tighten the screws.
The first one of these I did a couple of years ago took WAY too long
Your messages not reaching the list?
Check out http://www.team.net/posting.html
=== Help keep Team.Net on the air
=== unsubscribe/change address requests to firstname.lastname@example.org or try
=== Other lists available at
=== Archives at http://www.team.net/archive
=== Edit your replies!