[Top] [All Lists]

[Spridgets] Crankshaft Spigot bearing removal

To: spridgets@autox.team.net
Subject: [Spridgets] Crankshaft Spigot bearing removal
From: Daniel1312@aol.com
Date: Wed, 5 Sep 2007 17:05:08 EDT
Hi List,

I've discovered that my engine has had a new spigot bearing fitted to it.  
Unfortunately I need to remove it as my car runs a Ford based 5 speed 
which uses a spigot adaptor.

I recall the recommended technique is to fill the end of the crank with 
grease and hydraulic the spigot out by the use a drift or old gearbox input 
I don''t have an old gearbox or input shaft to use let alone measure any more 
than I have a drift of the right size.  I don't mind buying a drift of the 
right size but need to know the size.

So, anyone have the size?



Edit your replies



<Prev in Thread] Current Thread [Next in Thread>