[Top] [All Lists]

Re: [Spridgets] Crankshaft Spigot bearing removal

To: "Spridgets" <spridgets@autox.team.net>
Subject: Re: [Spridgets] Crankshaft Spigot bearing removal
From: "Guy R Day" <grday@btinternet.com>
Date: Thu, 6 Sep 2007 10:25:20 +0100
A lot of people have drill bits of various sizes and if the shank is a 
reasonable fit, it is a thickish grease and there is a large piece of wood 
between the point of the drill bit and hammer to protect the drill it does 
work.  As the bush is a new one it may be worth trying to preserve it.

(Is it any wonder my larger bits are bent? ;-)   )

>> I just make a mess with the grease, I've never been
>> able to make it work. I just use a hand drill and
>> carefully drill it out, it usually spins out easily
>> once a little material is gone.

Edit your replies



<Prev in Thread] Current Thread [Next in Thread>