On 11/14/2010 5:57 PM, BJNoSHOV8 wrote:
> Preparing for pulling the engine-
> 1. At what point do you disconnect the front motor mounts?
Disconnect the 2 nuts from engine side of the left mount (steering
Disconnect the 3 bolts from the frame on the right side.
This makes it easier to pull the engine, once it's up a little remove
the 2 nuts from the engine for a little added clearance if you want.
If you are only pulling the engine, pull the starter, otherwise it can
come out with the whole mess.
Toms River, NJ
Suggested annual donation $12.75