tigers
[Top] [All Lists]

Re: [Tigers] Clear Hooters

To: <genepadgett@comcast.net>
Subject: Re: [Tigers] Clear Hooters
From: " Ron Fraser" <rfraser@bluefrog.com>
Date: Mon, 18 Nov 2013 19:48:29 -0500
Cc: tigers@autox.team.net
Delivered-to: mharc@autox.team.net
Delivered-to: tigers@autox.team.net
Thread-index: Ac7kAvyk5iUz1qeBQB2MopNCAUjERAAvZKkg engine=2.50.10432:5.10.8794,1.0.14,0.0.0000 definitions=2013-11-18_02:2013-11-18,2013-11-18,1970-01-01 signatures=0 spamscore=0 suspectscore=1 phishscore=0 adultscore=0 bulkscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=7.0.1-1305240000 definitions=main-1311180220
Gene
    Currently I have the Hi horn on the left side and the L horn on the
right side.
I took no note of which side they were originally on, so this is how I put
them back on my Tiger.

Ron Fraser

-----Original Message-----
From: genepadgett@comcast.net [mailto:genepadgett@comcast.net]
Sent: Sunday, November 17, 2013 9:08 PM
To: rfraser@bluefrog.com
Cc: tigers@autox.team.net
Subject: Re: [Tigers] Clear Hooters


Thanks Ron,

I guess I could make this a little bit of a survey.  The horns, at least
mine, have either a "H" or a "L" molded into the lip and  is fairly easy to
see through the grill opening.  If anyone is inclined to have a look at
theirs, I would be interested in hearing on which side the H horn is
located.  (I can figure out the rest :>)

I had previously made horn hole blockoff plates but did a poor job of
locating the holes for the wires.   Also made longer brackets to put the
horns fully in front of the plates.  I am looking to redo the plates with
better wire hole locations, and  which side I mount the horns to be directed
straight ahead affects the wire hole placement.

Gene
_______________________________________________

tigers@autox.team.net

Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/tigers/mharc@autox.team.net


<Prev in Thread] Current Thread [Next in Thread>