tigers
[Top] [All Lists]

Re: [Tigers] 90 degree oil filter adaptor

To: Ron Fraser <rfraser@bluefrog.com>
Subject: Re: [Tigers] 90 degree oil filter adaptor
From: Terry Lawell <tlawell@austin.rr.com>
Date: Sat, 03 Jul 2021 14:36:50 -0500
Cc: tigers@Autox.Team.Net
Delivered-to: mharc@autox.team.net
Delivered-to: tigers@autox.team.net
References: <60DE5EE1.70703@austin.rr.com> <000001d77009$57628550$06278ff0$@bluefrog.com> kfDt7jxlJLDwsePHebbwvwq1BgKhZVLdnuZ6bnmiog3SO9z+8/++17M5F9mncIc2/lY83Z0HGhdqmLOqiv+xY7pFeDABBsqFfo39CfR0KFBvBn3vb+uTBnyw qcd7H0EA4yuRR9LK429F9A==
User-agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.15; rv:17.0) Gecko/20130620 Thunderbird/17.0.7
Hi Ron,

  It turns out Summit had the right adapter for the kit, the sales 
person just didn't know it. They have sent the adapter to me and it fits 
correctly in the block as well as in the kit. The only problem was the 
oil filter they sent me was incorrect - it hits up against the oil pan. 
Is it the ph3600 that is slimmer and fits that kit?
  I also found another problem - the oil line from the oil pressure 
gauge was cracked and leaking. when I disconnected the oil line fitting, 
I also took off the fitting that goes into the block. It was very 
difficult to get off and I am concerned that someone either put a 
fitting in there with the wrong threads or stripped the threads when 
they installed it. Do you know what size those threads are? It appears 
to be a british standard pipe thread. I had to use whitworth wrenches to 
get both the pressure fitting nut and the fitting to the block off. Any 
info on these fittings would be much appreciated.

Cheers, Terry


On 7/3/21, 7:45 AM, Ron Fraser wrote:
> Terry
>       1st -  I would contact Summit to make sure that oil filter kit did
> not come with an adaptor or if it is missing from your kit.
> 2nd -  does Summit have the adaptor needed for this kit?
>
> C20Z 6890-C seems to be the Ford part number for the adaptor - 3/4 x16
> thread and 1 1/16 x 12 thread
> You need to check that this is correct for your oil filter kit.
>
> https://www.npdlink.com/search/products?search_terms=fitting%2Boil%2Bfilter&;
> top_parent=200001&year=
>
> see if 6890-A is the part you need.
>
> Ron Fraser
>
> -----Original Message-----
> From: Tigers <tigers-bounces@autox.team.net> On Behalf Of Terry Lawell via
> Tigers
> Sent: Thursday, July 01, 2021 8:34 PM
> To: tigers@autox.team.net
> Subject: [Tigers] 90 degree oil filter adaptor
>
> I purchased a 90 degree oil filter adapter from Summit Racing and when it
> arrived I realized it did not have the adapter for the block, though the
> salesman told me it came with it. Does anyone know where I can get the
> adapter? I think it is 1.16" threads to the block and 13/16" threads to the
> adapter.
>
> Cheers, Terry
> _______________________________________________
>
> tigers@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive
>
> Unsubscribe:
> http://autox.team.net/mailman/options/tigers/rfraser@bluefrog.com
>
>
>

_______________________________________________

tigers@autox.team.net

Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive

Unsubscribe: http://autox.team.net/mailman/options/tigers/mharc@autox.team.net



<Prev in Thread] Current Thread [Next in Thread>