Tony Robinson writes:
>By replacing the float valve with a new "ball on ball" Grose jet, the
>worry of too much pressure can be avoided since most over the counter
>fuel pumps offer only up to about 7 lbs of pressure, very similar to
>Factory mechanical pumps. The Grose jet is a vast improvement and very
>simple to install.
There was a thread on the MGs list that Grose-Jets are having some
quality difficulties recently. Seems that several people who have fitted
them in the past year or so and the balls don't always mate properly,
creating leaks. Just passing on info.
Dave Williamson (silikal@aol.com) Spits in bits
|