Re: TR3-Fitting doors AARRRRG !

["J.H. Roulleaux" <Jean.Rouleaux@skynet.be>]

Hi Pat,
I did bent the hinges on my TR3 to get a proper door fit.This is no 
problem if you have to do small corrections,and you don't want to
add additional spacers between body and chassis.The problem 
with spacers is that you risk to disturb the good fitting elsewhere.
When I started panel fitting I was told to start at the rear wing and 
work towards the front end.Get a good door fit before you touch
the front wing.
Regards
Jean

///
///  triumphs@autox.team.net mailing list
///