Use contact cement, and you can leave your books on the shelf. However, you
MUST
use a roller with firm pressure to get the contact cement to bond well enough so
that the veneer won't lift away from the facia later on.
--
Martin Secrest
72 TR6
73 GT6
Mark Hooper wrote:
> Don't use too
> much glue and make sure you put weights across the whole surface, otherwise
> you will get wrinkles in the veneer as the glue makes it damp. Put a lot of
> weight on top of a waxed paper or plastic film on the UPTURNED surface.
> That's important or you won't stick at the edges. I put at least 500 pounds
> of books and bricks on top, but a little too much glue so I had a small
> "wave" in the veneer that I had to sand down. Nervous work that.
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|