At 2:14 PM -0500 2/9/02, Hugh Fader wrote:
>Well. I have another stuck bolt on my TR6: the crankshaft end bolt. I have
>two of the radiator bolts installed and am holding it from turning with a
>screwdriver between these. I have sprayed the bolt with Kroil and gave it a
>few whacks. Trying to turn it with a big adjustable wrench. This isn't a
>left-hand thread by chance is it? Next step I guess would be heat, but where
>to apply it? It looks like the threaded hole is behind the pulley.
Don't know if this will work for a TR6, but on my TR3 I just wedged a
big wrench to the frame and hit the starter...viola...loose bolt.
Good Luck
--
Bill Pugh
1957 TR-3
aka Casper
TS16765L
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|