The square pad welded to the axle tube which was the leaf spring
mounting point was in a different place, and the 4A had pads welded top
and bottom. Other than that, they were pretty well the same, and the
innards were virtually identical..
Mike Kitchener wrote:
>Russ Locke wrote :
> > Will a complete '67TR4A live axle fit my '64 TR4?
>If you can believe the Moss UK catalog , it states that the only difference
>is in the drive input flange , square for the 4 , round for the 4A , which
>seems strange as
>the prop shaft is the same for both .
/// email@example.com mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive