I had this same problem with the kit I bought from Moss. I wrote to the
makers of the kit who sent me a spigot which did the trick. From memory you
need about 35mm of thread to get into the original oil filter head and as
supplied by Moss there just was'nt enough thread.
I lost a lot of email after a computer crash includung my discussion with
the kit makers, but you should be able to get ion touch with them through
www.thinkauto.co.uk and I had great service from a chap with an email
info@thinkauto.co.uk. He sent me a spigot that was just right.
Hope this helps.
David Brister 1967 TR4A
|