triumphs
[Top] [All Lists]

Re: Wire Wheels (and knock off hammers)

To: oliver@connect.net, triumphs@autox.team.net
Subject: Re: Wire Wheels (and knock off hammers)
From: AVALON2455@aol.com
Date: Thu, 11 Dec 2003 23:41:04 EST
If it looks like the 'soft lead' hammer at www.britishwirewheel.com/hammers  
you are good to go!........if not........wait a bit and  get the hammer that 
will not eventually destroy your new knock-offs..........

I like 'anti-seize' sparingly applied to the grooves on the hub and wheels.  
Some like white grease..........they are all messy!......Take the wheels off 
every few months if you are driving a lot, ......check, clean if necessary, and 
reapply with whatever is your favorite unguent.  In my experience, no matter 
what you apply............in a year..........the wheel will be hard to get off 
the hub............and your wife/husb/sig other........will not be pleased!   
Nor will YOU!

Cleaning............That's not a 'can of worms'.........it's a huge 
vat!!!............I've really never found anything that is easy.......first 
off.......Clean Often........next........use strong detergent........take your 
pick.......haven't really found any difference between TSP and Somebody's 
'Super 
Wash'........use pressure, rags, toothbrushes, a 4" poly paint brush isn't too 
bad, a 
cone shaped 'wire wheel brush' helps as well..........I have found 
nothing.........NOTHING.....that you can spray on.........leave 
sit...........spray 
off.......that works worth a s---!  It must be wiped, brushed, scrubbed, 
etc......... 

And.......as an aside..............if Anyone! has a better idea.......a 
secret process.......a new procedure.........Oh! Please, Please!!!!........let 
me 
know.......This is the most labour (Br.) intensive job that I know 
of..........to get it really clean.........remove wheel........dismount tire 
and 
tube.........soak in a tub of hot (150 deg) TSP mixture for 12 
hours.........rinse 
thoroughly, and then apply just a bit of touchup here and there..........and 
remount..............it'll be clean......................<g>..............

I've asked some winners at car shows how they keep their wires so  
clean..........The response is........"Dismount tires......high pressure 
wash....meticulously clean......put on new set of tires.......and the minute 
the show is over 
replace with my 'drivers' "..........a different set of wheels and 
tires........<g>..........wouldn't you know it!!!


Cheers..............and have some good holidays!............

Clark




<Prev in Thread] Current Thread [Next in Thread>