I purchased new springs from BPNW for my TR250. They are supposed to be
30% firmer but with the same ride height. I have not installed them yet.
Does anyone have experience with them? I will use stock lever shocks in
the rear.
FWIW they appear to be the same height unloaded.
Don Malling
david brady wrote:
> Jack,
>
> They won't settle. I went through many spring
> sets before I found something suitable. I
> finally ended up using Good Parts springs,
> Good Parts also has a set of aluminum
> spacers to adjust the height.
>
> Dave
>
> jack williams wrote:
>
>> I just finished putting new springs and a tube shock conversion on my
>> 76 TR6.
>> I don't like the look, it raised the ride height in the rear a bunch.
>> Will the
>> springs settle some or am I just stuck with it as it is. The old
>> springs road
>> a bit low, and every time you hit a bump it jarred your eye teeth
>> loose. The
>> ride is much better now, but I just don't like the way it looks.
>> Thanks for
>> any help.
>>
>> Jack W.
|