triumphs
[Top] [All Lists]

RE: no can shift!!!

To: triumphs@Autox.Team.Net
Subject: RE: no can shift!!!
Date: Sun, 28 Nov 2004 11:51:20 -0800
References: <NOEDJDCNFBCNELMBFNFEMEDKHHAA.tr3driver@comcast.net>
Or, ... you could have an old slave cylinder hose that is collapsing 
and functioning as a one-way valve ...



>  > when you put in the clutch, the lever sticking out of the tranny moves an
>>  inch or so, so am i correct in thinking the hydraulics are working ok?
>>
>>  also, when i bled it, unlike the brakes which gave me a good squirt every
>>  time, sometimes i would get a decent squirt, sometimes just a dribble.
>
>Oliver, I've no idea what is normal movement for the lever on a Datsun 1600.
>Until your last statement, I would have guessed that the clutch disk is
>rusted to the input shaft, but that last statement sure sounds like problems
>in the clutch MC.  Triumph MCs are prone to having an internal spring break
>that can cause similar symptoms, perhaps it's worth having yours apart to
>check.  Certainly a lot easier and cheaper than pulling the tranny to check
>the input shaft.
>
>Randall


-- 
Bill  Pugh
1957 TR3
aka
Casper
Wallace, CA




<Prev in Thread] Current Thread [Next in Thread>