In addition to Randall supporting my LBC mechanic as to my state of mind
Just how is the pressure bypass valve supposed to be set in a normal
situation?
Thanks, Fran
> -----Original Message-----
> From: Francis P. Gowash [mailto:fpgowash@cox.net]
> Sent: Sunday, October 02, 2005 5:45 PM
> To: Triumph TR3A
> Subject: TR3A Oil Pressure
>
> I've had the engine rebuilt last spring and have 500 or so miles on it
> since.
> The question is the oil pressure. It is always around 80. Doesn't come
> down much when idling if at all.
> Is this OK? Is there such a thing as too high oil pressure? Should I be
> concerned?
> I am using 20W-50 with temperatures experienced 60-90 deg F. over the last
> few months.
> I am not sure if this is a possible symptom of the so called bypass valve
> adjustment or not.
> Any advice would be welcome. My little LBC mechanic says I am paranoid,
>
> Thanks, Fran
> 58 TR3A
> Somers, CT
[demime 1.01d removed an attachment of type application/ms-tnef which had a
name of winmail.dat]
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|