Your problem of fitting a hi-torque starter is not necessarily the direction
of the ring gear - since the starter does not turn until the drive is fully
extended - but the number of teeth on the drive. I believe the two different
TR3 flywheel arrangements take different drive gears - either 9 or 10 teeth.
Others can be more specific - Randal?
Peter Arakelian - '71 TR6, Daily Driver
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
=== unsubscribe/change address requests to majordomo@autox.team.net
|