triumphs
[Top] [All Lists]

Prop shaft parts

To: triumphs@autox.team.net
Subject: Prop shaft parts
From: John Gillis <jgillis@tcd.ie>
Date: Mon, 6 Mar 2006 09:39:37 +0000
Hi all,
I bought a set Hardy Spicer joints to rebuild my prop shaft. I took 
the opportunity to replace the caked grease on the splines of the 
sliding shaft, the cork washer behind the seal is fairly shot, are 
these available, my initial search showed nothing. Any general advice 
about the prop shaft? how important is it to have it balanced after 
fitting the new uj's? or is the old jubilee clip trick as good as any.
Plodding away
John
-- 
John Gillis
1954 Triumph TR2
1991 Kawasaki W650
Dublin
IRELAND


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org


===  unsubscribe/change address requests to majordomo@autox.team.net

<Prev in Thread] Current Thread [Next in Thread>