triumphs
[Top] [All Lists]

Re: steering shaft end play

To: "Phil Nase" <nase@ptd.net>,
Subject: Re: steering shaft end play
From: "Phil Nase" <nase@ptd.net>
Date: Sun, 12 Mar 2006 13:46:52 -0500
I pulled the pinch bolt out.  It looks OK except possibly a little bent.  PO 
had a nyloc nut on it with flat washers.  The machined area around the 
splines is a little worn.  I can detect no play in the pinion with hand 
pressure only so can I assume the shims are correct?

Off to buy a bolt.

Phil Nase
http://home.comcast.net/~philnasecpa
|I have the dreaded steering column play.  What shim material is available.
| I see it as N/A at the usual places.
|
| Phil Nase
| http://home.comcast.net/~philnasecpa




<Prev in Thread] Current Thread [Next in Thread>