Bill,
These panels are easily replaced without removing the fenders!
Jim
Jim Bauder
'68 TR250, CD47L
TR web site: http://www.triumphowners.com/647
Scottsdale, AZ
-----Original Message-----
From: owner-triumphs@autox.team.net
[mailto:owner-triumphs@autox.team.net]On Behalf Of Steinman, Bill
Sent: Tuesday, April 18, 2006 11:51 AM
To: triumphs@autox.team.net
Subject: [TR] TR250/6 Splash Panel Q.
Howdy all:
I need to replace one of the splash panels in the front fender arch of
my 250. This is the panel that (sort of) seals off most of the inner
front fender from the wheel arch. Here's my question -- is it possible
to replace the panel without removing the fender? I can't tell from the
TRF catalog picture whether it uses nuts and bolts (which would require
access to both sides with the fender removed) or just screws in (which I
presume could be done without removing the fender).
As always, thank you for your collective wisdome!
Best,
Bill S.
Bill S.
1968 Triumph TR-250 (CD8464L)
1965 Austin Healey 3000 Mk III
www.TR-250.com <http://www.tr-250.com/>
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|