Howdy all:
I need to replace one of the splash panels in the front fender arch of
my 250. This is the panel that (sort of) seals off most of the inner
front fender from the wheel arch. Here's my question -- is it possible
to replace the panel without removing the fender? I can't tell from the
TRF catalog picture whether it uses nuts and bolts (which would require
access to both sides with the fender removed) or just screws in (which I
presume could be done without removing the fender).
As always, thank you for your collective wisdome!
Best,
Bill S.
Bill S.
1968 Triumph TR-250 (CD8464L)
1965 Austin Healey 3000 Mk III
www.TR-250.com <http://www.tr-250.com/>
NOTICE: This communication may contain privileged or other confidential
information. If you are not the intended recipient, or believe that you have
received this communication in error, please do not print, copy, retransmit,
disseminate, or otherwise use the information. Also, please indicate to the
sender that you have received this communication in error, and delete the copy
you received.
IRS CIRCULAR 230 Disclosure: Under U.S. Treasury regulations, we are required
to inform you that any tax advice contained in this e-mail or any attachment
hereto is not intended to be used, and cannot be used, to avoid penalties
imposed under the Internal Revenue Code.
Thank you.
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|