[TR] windshield wiper underdash assembly

["Terry Smith" <terryrs@adelphia.net>]

Hello, everyone.

A curved tube runs from the wiper motor through the firewall and curves under
the dash.  It ends at the first wiper gearbox.

I have another four inch tube that attaches either to the exit side of the
first wiper gearbox, or to the entrance side of the second wiper gearbox.

Am I missing a length of tube, or is it just the two pieces (the one from the
motor, and one short 4" one)?

As always, thanks to all.

Terry Smith, '59 TR3A
New Hampshire


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org