Do you have all the shrouds installed, These are fibre board pieces
that run down each side of the engine compartment and encase the rad
directing airflow through, not around the radiator, Also Through the
engine compartment.
On 23-May-06, at 8:51 PM, Triumphs@Autox.team.net daily digest wrote:
>
> Date: Tue, 23 May 2006 15:04:52 -0400 (EDT)
> From: Cameron Rooke <beaker211@rogers.com>
> Subject: [TR] Heat shield template
>
> Greetings,
>
> I was wondering if anyone has a template for a heat shield for a
> GT6 ('71 with strombergs) or a website where I can download one.
> Even one for a TR6 so I can get the basic shape to start with would
> be appreciated. Popping the hood for 15 minutes at every short
> break in driving is getting on my nerves. Any help much appreciated.
>
> Cameron
> '71 GT6
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|