RE: [TR] Flap along front edge of sidescreen hood/top

["John Herrera" <jrherrera90@hotmail.com>]

>I'm unsure what to do with this flap when I start fitting the hood. Is the
>flap supposed to fold and are the Tenax fittings to go through both the
>hood and the folded flap? Or is the flap to be left unfolded and does it
>lie on top of the windscreen when the hood is fitted?
>
>Thanks for any answers.
>
>Eric

The flap goes between the windscreen and the Tenax snaps. Cut holes about 
1/2 inch diameter in the flap to allow the Tenax studs to pass through it.

John H.


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org