Hi Jerry,
Check out the Fusor pdf file:
http://www.lordfulfillment.com/upload/SI3155.pdf
These adhesives are usually available at larger NAPA stores that have a
paint department. The dispensing guns use a special tip that mixes the two
parts together. Some stores may have a loaner gun.
Rick
75 TR6sci
http://topshamautoparts.com/tr6/
> -----Original Message-----
> From: owner-triumphs@Autox.Team.Net
> [mailto:owner-triumphs@Autox.Team.Net]On Behalf Of Jerry Stasyszen
> Sent: Sunday, January 28, 2007 2:40 PM
> To: 'Triumphs'
> Subject: [TR] Welding
>
>
> Several weeks back a discussion was going on about using an adhesive to
> install floor pans with rather than welding them in. Can someone post the
> types of adhesives there were suggested?
>
> TIA
> Jerry
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|