I found it simpler to wedge the wrench on the frame, and the hit
the starter button, bolt comes right out ...
>After a lot of good advice I have the fan extension off and replaced
>with a Fan elimination kit from Rick Patten at TBI Conversions
>http://www.Sidedrafttbi.com (NFI). I was successful after heating up
>the dog bolt with a propane torch & then using a 1 1/8' socket with
>my electric impact wrench!
>
>I can send out a picture of the installed fan eliminator to anyone
>who is interested in seeing it.
>
>Again thanks for the help
>
--
Bill Pugh
1957 TR3 TS16765L
aka
Casper
AnnaBelle Pugh
1970 TR6 CC59179L
aka
Rosey
Wallace, CA
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|