triumphs
[Top] [All Lists]

Re: [TR] Autumn classic.-- now rear springs

To: "THOMAS FANSHER" <tfansher@comcast.net>
Subject: Re: [TR] Autumn classic.-- now rear springs
From: "Alex" <ambritts@bellsouth.net>
Date: Mon, 22 Oct 2007 19:02:58 -0400
As a follow up to Tom's post, here is how I did it. First if you take the 
tub off the frame there is no problem. Using a drift it will pop out with a 
good blow. With the tub on, a real challenge. One came out for me per the 
book, with the help of heat and penetrant. The other forget it. What I did 
was remove the aluminum stone guard. Located the bolt behind where the guard 
is. Drilled a 9/16" hole. Placed the drift square on the head of the bolt 
and popped it right out. Put a rubber plug in the hole (used on the firewall 
and elsewhere) and put it all back together. Very slick and fast.
Alex
59 TR3A
72 TR6
----- Original Message ----- 
From: "THOMAS FANSHER" <tfansher@comcast.net>
To: "tom white" <tswhitez123@hotmail.com>; <triumphs@autox.team.net>
Sent: Monday, October 22, 2007 10:30 AM
Subject: Re: [TR] Autumn classic.-- now rear springs


> Joe Alexander is in the process of manufacturing an improved silent bloc
> which you might take a look at. It's not in production yet but may be when
> you're ready for them. I had a terrible time removing the bolt from the
> front of the rear spring - through the silent bloc - let me know if you 
> have
> problems and I'll share what I know.
> Tom
> 61 TR3A with new rear springs
> 62 TR4 needing new rear springs
> 73 Stag
>
> .
>
>> Does anyone have a referral for a good place in the south bay of San
>> Francisco
>> to have TR3A leaf springs re-arced?
>>
>> Best regards,
>> Tom
> _______________________________________________
_______________________________________________

This list supported in part by the Vintage Triumph Register
http://www.vtr.org

Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs

<Prev in Thread] Current Thread [Next in Thread>