---- PeterSchop@aol.com wrote:
>
> But the part of the bore that is preventing the piston from coming out isn't
> the part that is a sealing surface...I'd get some fine emery cloth and knock
> the rust/corrosion down a bit, then pop it out with air or inertia. Should
> help to keep the piston unscathed.
>
> Jeff, t
> he problem with cleaning the bore with emery cloth is holding the piston out
> of the way. The spring is pushing the piston against the corrosion. I can
> hold it back with a phillips screw driver but the screw driver is now in the
> way of cleaning it out..
Ahh... I see a special tool on the horizon... <g>
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|