Put the phillips screw driver away and use a normal screw driver.
Now the phillips screw driver is not in the way of cleaning!
How easy was that!
Rich White St. Joseph, IL USA
'63 TR3B TCF587L
That ain't a scrap pile, that is my car!
See it moves!
> Date: Thu, 13 Mar 2008 10:24:51 -0700
> From: fishplate@charter.net
> To: triumphs@autox.team.net; PeterSchop@aol.com
> Subject: Re: [TR] clutch MC will not come apart
>
> ---- PeterSchop@aol.com wrote:
> >
> > But the part of the bore that is preventing the piston from coming out
isn't
> > the part that is a sealing surface...I'd get some fine emery cloth and
knock
> > the rust/corrosion down a bit, then pop it out with air or inertia.
Should
> > help to keep the piston unscathed.
> >
> > Jeff, t
> > he problem with cleaning the bore with emery cloth is holding the piston
out
> > of the way. The spring is pushing the piston against the corrosion. I can
> > hold it back with a phillips screw driver but the screw driver is now in
the
> > way of cleaning it out..
>
> Ahh... I see a special tool on the horizon... <g>
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as rlwhitetr3b@hotmail.com
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|